Panda Motorworks Direct Port Water/Meth Injection Kit (Focus ST/RS)
Looking to add direct port water/meth injection to your Focus ST/RS? Look no further than the Panda Motorworks Direct Port Water/Meth Injection Kit...
View full detailsLooking to add direct port water/meth injection to your Focus ST/RS? Look no further than the Panda Motorworks Direct Port Water/Meth Injection Kit...
View full detailsThe Precision Raceworks 2.0 EcoBoost Port Injection kit is a necessity to safely and sufficiently support the power levels of anyone needing addit...
View full detailsAs an OE Supplier Bosch provides the exact flow and original spray pattern for optimal performance Robust injector combustion process tolerates l...
View full detailsThis kit is for the 2016+ Ford Focus RS. It is designed to replace the OEM fuel filter which is plumbed between the electric and mechanical fuel pu...
View full detailsUnlock 50-80HP on your boosted vehicle while decreasing your air temps by up to 150 degrees! The all new Snow Performance Stage 2 Boost Cooler® wat...
View full detailsINSTALL INSTRUCTIONS This comprehensive installation kit includes everything needed to install a Radium fuel surge tank (FSTR-RA) in a 2013+ Focu...
View full detailsThese injectors are a direct drop-in intended for the 1.6L EcoBoost engine and can increase flow up to 30%. This additional flow will fuel up to 35...
View full detailsIf cars like yours typically suffer issues such as backfiring and stalling when using a fixed-ratio atmosphere-venting BOV, the Respons can hel...
View full detailsBring some heat to your hot hatch! The Nostrum fuel bundle is the ultimate fueling solution for getting the most out of your Focus RS! Incl...
View full detailsExtreme Turbo Systems Focus RS Front Mount Intercooler and Piping Kit Our ETS Front Mount Intercooler for the Ford Focus RS is one of the easiest w...
View full detailsThe Snow Performance Hyper-Sonic water-methanol injection nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of...
View full detailsTune required?: YesMax Operating pressure: 240 Bar The factory 1.6 & 2.0 EcoBoost fuel systems are designed to operate at pressures up to 15MP...
View full detailsProton Series nitrous systems combine performance, durability and value in a compact and easy to mount module. Proton systems contain high quality,...
View full detailsFITS ALL 2018+ HONDA ACCORD 2.0L TURBO MODELS INCLUDING RHD, INTERNATIONAL MODELS, ETC Please Read Before Ordering: FLEX-FUEL KITS REQUIRE A ...
View full detailsWHP Potential on Gasoline:710 WHP WHP Potential on E85: 525 WHPTune requirement: YesRecommended Tuning Suite: COBB - COBB - Focus ST, Focus RS, Mu...
View full detailsThe COBB 1050x Fuel Injectors provide increased fuel flow while maintaining stock idle and driveability with proper tuning. Corrosion resistant i...
View full detailsHere, you are looking at the cp-e Exhale Hard Pipe Kit. This particular kit will come with the HKS BOV Flange for those of you who want to install ...
View full detailsThese anodized billet aluminum adapter fittings can be used in any application using a 9/16"-18 O-ring port. This is the same thread pitch used in ...
View full detailsOverview K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler...
View full detailsDESCRIPTION This upgrade kit includes the Subaru CAN Flex Fuel Upgrade Kit (CAN Gateway Module with Harness / Bracket and Ethanol Sensor), and th...
View full detailsDisplacement increase over stock: 36 Geometric displacement: 1.22 cc/rev Max Operating Pressure: 250 bar (requires optional Nostrum E460...
View full detailsWHP Potential on Gasoline: 580 WHP Potential on E85: 490 Displacement increase over stock: 36% Geometric displacement: 1.22 cc/rev Max Op...
View full detailsThe ID1700x is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport. The ID1700x was designed to fill the gap b...
View full detailsKeep those boost temps down with the Boost Cooler! The Snow Performance Stage 2 Boost Cooler water-methanol injection kit is available for all fo...
View full detailsWHP Potential on Gasoline: 770 WHPWHP Potential on E85: 570 WHPTune requirement: YesRecommended Tuning Suite: COBB, HPtunersFlow Rate Increase ...
View full detailsALL THE PERFORMANCE WITH OR WITHOUT THE NOISE! , GFB?s Mach 2 utilises GFB?s proven TMS Technology to ensure rapid boost recovery on gearshift and ...
View full detailsAEM's 340lph E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity cha...
View full detailsThis kit is designed for use in the USDM 2008-2019 Subaru WRX STi (EJ257 only) and replaces the OEM fuel pressure regulator and damper assembly, sh...
View full detailsThe mantra behind the grandfather of all hot-hatchbacks has long since been that big things come in small packages. Now on its 7th generation, the ...
View full detailsOpen up the flow of the charged air in your 2013+ Ford Focus ST with the Mishimoto hot-side intercooler pipe. The stock hot-side pipe in your Focus...
View full detailsDirect fit for the 2016–2018 Ford Focus RS 80% increase in core size 36% increase in internal core volume and 214% increase in external fin surfac...
View full detailsPRODUCT FEATURES Direct fit for the 2016–2018 Ford Focus RS Silicone construction absorbs the stresses of excessive engine movement Improves heat ...
View full detailsPRODUCT FEATURES Direct fit for the 2016–2018 Ford Focus RS Silicone boots absorb the stresses of excessive engine movement Designed to not block ...
View full detailsAEM's V2 Water/Methanol Injection Kits For Forced Induction Engines are a proven means for effectively reducing engine inlet air temperatures and s...
View full detailssales@pandamotorworks.com
(636) 614-3100
Keep up to date on new product launches and offers.
Copyright © 2025 Panda Motorworks.