The King XP main bearing set features the pMax Black tri-metal structure mainly used in racing applications. The bearing is a copper based and feat...
View full details
The King XP main bearing set features the pMax Black tri-metal structure mainly used in racing applications. The bearing is a copper based and feat...
View full details
We started with brand new Ford 2.3 Ecoboost FORGED crankshafts and added a proper keyway to so allow the timing chain drive gear to be positively l...
View full details
Sale
Professional engine builders and elite tuners around the world are running Manley pistons for some very good reasons. Manley's signature Platinum S...
View full details
Save 10%
*"H" Beam - Economical*For the budget conscious enthusiast, we also offer our very high quality, yet economical, H-Beam design connecting rods. The...
View full details
MASSIVE SPEED PRE-INSTALLED PRO TRAPPED OIL CONTROL PAN BAFFLE DURATEC ECOBOOST FOCUS 2.0 2.3 2.5 W/ BALANCE SHAFT DELETE Genuine: Massive Speed S...
View full details
HEAD DIAM: 30.00mm STEM DIAM: 5..45mm Sodium filled LENGTH: 104.7mm MATERIAL: Inconel COMMENT: Sodium filled single groove VALVE TYPE: Exhaust
HEAD DIAM: 32.5mm STEM DIAM: 5.47mm LENGTH: 103.3mm MATERIAL: Black Nitrided Single groove VALVE TYPE: Intake Dish face. Single Groove must ...
View full details
Save 10%
Manley Ford 2.3L EcoBoost H Beam Connecting Rod Set w/ .886 inch Wrist Pins ARP 2000 Rod Bolts
83mm 87.5mm PowerPak Plus Piston and Ring Kit (197714245) by Mahle®. Bore Size: 87.5mm. Wrist Pin Size: 22.5mm. Compression Height: 32.78mm. Cranks...
View full details
Clevite H-Series performance bearings have a medium level of eccentricity, high crush, and a hardened steel back and thin overlay. These bearings a...
View full details
JE Pistons Ford 2.3L EcoBoost 88mm Bore -7.6cc Dish Piston Kit (Set of 4 Pistons)
ARP's L19 head stud material has a higher tensile strength than the stock Ford and Mazda head studs and the ARP 2000 head studs currently available...
View full details
We started with A brand new Ford chain drive gear and EDM cut a proper keyway to allow the timing chain drive gear to be positively locked to the c...
View full details
Focus RS Ecoboost Mustang Ford Ecoboost 2.3L MLS Turbo 89mm (3.504) 1.3m (.051) Thick
Sale
2618 High Strength Material, Lightweight Design Offset Wrist Pin Location for Quiet Startups - Mimics OEM Design Perfect Ring Groove to Skirt Squa...
View full details
ARP Ford Eco Boost 1.6L 4-Cylinder 12pt Head Stud Kit Virtually every top professional engine builder relies on ARP Pro Series head studs for their...
View full details
Save 5%
Forged from 4340 aircraft quality vacuum degassed material Shot peened after machining to MIL spec and 100% individually magnafluxed Specifically d...
View full details
TYPE: Dual Spring PRESS.SEAT: 77lbs @34.30mm MAX LIFT: 14.30mm COIL BIND: 20.00mm RATE: 9.60 lbs/mm RETAINER: RET-TS5.5/T1 SPRING : SPR-TS1...
View full details
TYPE: Beehive Spring PRESS.SEAT: 57 @34.40 MAX LIFT: 12.20mm COIL BIND: 22.20mm RATE: 9.80 lbs/mm RETAINER: RET-MC56/T1 SPRING : SPR-FE56BE...
View full details
Save 5%
Forged from 4340 aircraft quality vacuum degassed material Shot peened after machining to MIL spec and 100% individually magna-fluxed Specifically ...
View full details
Save 20%
Head Diam: 30mm(std) Flat Stem Diam: 5.48mm Length: 104.7mm Material: Black Nitrided Valve Type: Exhaust Engines Ford - LX 4cyl 2.0l - 30m...
View full details
The BP255 Cam Generally referred to as the stage 1 of cam tuning this profile performs well when used in conjunction with other stage 1 tuning pr...
View full details
Save 20%
Head Stud Kit; ARP2000 Pro Series; Undercut Studs; 12Point Head
Save 20%
Supertech Block Guard for Ford Ecoboost 2.3L
MASSIVE ABSOLUTE TIMING TOOL SET 3PC SIGMA FORD Timing Tool Set PRO - Ford Sigma Engines 3 Piece kit is designed specifically for the turbocharged ...
View full details
Standard Size High Performance Rod Bearing Set
TYPE: Dual Spring PRESS.SEAT: 84lbs @34.30mm MAX LIFT: 13.60mm COIL BIND: 20.70mm RATE: 12.10 lbs/mm RETAINER: RET-TS.5/T1 SEAT LOCATOR : S...
View full details
The OEM Subaru crank pulley has been a cause for concern ever since its original design. It is extremely heavy, susceptible to catastrophic failure...
View full details
PartNumber cgC4588-032 Description MLX Cylinder Head Gasket PositionRightBore Diameter89.5mm
PartNumber cgC4589-032 Description MLX Cylinder Head Gasket Position Left Thickness.032in
Manufactured from USA made oversized proprietary steel forgings to enable proper grain flow and guarantee removal of any surface inclusions, CP-Car...
View full details
